EnGenius Technologies SN-920 - Manual (Page 14)

~ 21~
Manual Dial(Post-Dial Tone)
ENTERING A NUMBER AFTER CONNECTING TO
DIAL TONE
*
While the handset is in the IDLE mode, you can press TALK to
make a call. There are three ways to make a call in the TALK
Mode:
* When dial tone is heard and
the handset is waiting for a phone
number to be entered, the following
screen will appear:
* Enter the desired phone number
from the numbered key pad. The
screen will show the following
display:
* After a number is dialed, this
screen will be displayed:
While in the TALK mode, press the
LEFT SOFT FUNCTION key to select
the REDIAL option. The following
screen will be displayed:
* The last number dialed will be re-
dialed
To call a number stored in the Phone
Directory, you can access the Phone
Directory log by entering the menu or
you can simply press the Up or Down
Scrolling Arrows to access the Phone
Redial
Directory Dial
*
5551222
VOLUME: 5
REDIAL MEMORY
00:00:00
VOLUME: 5
HOLD MUTE
5552222
~ 22~
From IDLE mode, press the RIGHT
SOFT FUNCTION key to select the
MENU option.
While in the Main Menu, select the
directory scolling option by pressing
the 2 key.
Information stored in location 01 will
be displayed first. Use the Up or
Down arrows to scroll through the
directory to locate the number of
your choice.
Press TALK to dial the phone
number displayed.
When the handset has dialed the
selected phone number, the screen
will display:
*
*
*
*
*
ADD OPTION
See Directory View Mode for additional instructions
on how to use the phone directory feature.
If the handset is unable to link to the base unit, it will return
to IDLE mode. The handset will display "No Connection" for
five seconds or until a key is pressed.
NOTE:
VOLUME: 5
HOLD
Smith
5551212
In the TALK mode, the following
screen will be displayed:
* To select MEMORY DIAL, press the
RIGHT SOFT FUNCTION key.
Memory Dial
*
VOLUME: 5
REDIAL MEMORY