Edimax Technology Multi-Homing Broadband Router - Manual (Page 33)

2.2 WAN
Use the WAN Settings screen if you have already configured the Quick Setup Wizard section and
you would like to change your Internet connection type. The WAN Settings screen allows you to
specify the type of WAN port connect you want to establish with your ISP. The WAN settings offer
the following selections for the router’s WAN port, Dynamic IP, Static IP, PPPoE, PPTP, L2TP,
Telstra Big Pond, Qos, Policy, DNS and DDNS. You have to select one of the two WAN ports
first and configure one WAN port at a time.
Parameters
Description
2.2.1 Dynamic IP address Your ISP will automatically give you an IP address
2.2.2 Static IP address
Your ISP has given you an IP address already
2.2.3 PPPoE
Your ISP requires PPPoE connection.
2.2.4 PPTP
Your ISP requires you to use a Point-to-Point Tunneling
Protocol (PPTP) connection
.
2.2.5
L2TP Your ISP requires L2TP connection.
2.2.6 Telstra Big Pond
Your ISP requires Telstra Big Pond connection.
2.2.7
Policy Your can configure WAN policy.
33