Edimax Technology Multi-Homing Broadband Router - Manual (Page 41)

rule and click “Move Down” to make its priority
lower.
QoS Rule:
You can assign packet classification criteria by its source IP range, source MAC address,
destination IP range, traffic type, protocol, source port range and destination port range
parameters. The parameters that you leave as blank will be ignored. The priority of this rule will
be applied to packets that match classification criteria of this rule. You can limit bandwidth
consumed by packets that match this rule or guarantee bandwidth required by packets that match
this rule. You also can assign which WAN port that the packets matching this rule can go through.
Parameters Description
Rule Name
The name of this rule.
WAN Port
Select the WAN ports that the packets matching
this rule can go through.
41