Edimax Technology Multi-Homing Broadband Router - Manual (Page 52)

Public Port
Enter the service (service/Internet application) port number
from the Internet that will be re-directed to the above Private IP
address host in your LAN
Note: Virtual Server function will have priority over the DMZ
function if there is a conflict between the Virtual Server and the
DMZ settings.
WAN Port
Assign the WAN port that you want to bind to the virtual
server. All the packets sending from this WAN port with
the assigned public port will be directed to the assign
private IP and private port.
Comment
The description of this setting.
Add Virtual Server
Fill in the "Private IP", "Private Port", "Type", “Public
Port”, “WAN Port” and "Comment" of the setting to be
added and then click "Add". Then this Virtual Server
setting will be added into the "Current Virtual Server
Table" below. If you find any typo before adding it and
want to retype again, just click "Clear" and the fields will
be cleared.
Remove Virtual Server
If you want to remove some Virtual Server settings from
the " Current Virtual Server Table", select the Virtual
Server settings you want to remove in the table and then
click "Delete Selected". If you want remove all Virtual
Server settings from the table, just click "Delete All" button.
Click "Reset" will clear your current selections.
Click <Apply> at the bottom of the screen to save the above configurations. You can now
configure other advance sections or start using the router (with the advance settings in place)
52