Edimax Technology Multi-Homing Broadband Router - Manual (Page 59)

2.4.6 ALG Settings
You can select applications that need “Application Layer Gateway” to support.
Parameters
Default Description
Enable
You can select to enable “Application Layer
Gateway”, then the router will let that
application correctly pass though the NAT
gateway.
Click <Apply> at the bottom of the screen to save the above configurations. You can now
configure other advance sections or start using the router (with the advance settings in place)
2.4.7 Static Routing
This router provides Static Routing function when NAT is disabled. With Static Routing,
the router can forward packets according to your routing rules.
Note: The DMZ function of firewall will not work if static routing is enabled.
59