Edimax Technology Multi-Homing Broadband Router - Manual (Page 42)

Bandwidth You can assign the bandwidth by the unit of
Kbps (1024 bit per second). You can limit the
maximum bandwidth consumed by this rule by
selecting “Maximum”. You also can reserve
enough bandwidth for this rule by selecting
“Guarentee”.
Source Address
You can select IP or MAC address as the source
address criteria.
Source MAC Address
Enter the MAC address of the packet that this
rule will apply to.
Source IP Address
Enter the source IP address range of the
packets that this rule will apply to. If you assign
192.168.2.3 – 192.168.2.5, it means 3 IP
addresses: 192.168.2.3, 192.168.2.4 and
192.168.2.5
Destination IP Address
Enter the source IP address range of the
packets that this rule will apply to. If you assign
192.168.2.3 – 192.168.2.5, it means 3 IP
addresses: 192.168.2.3, 192.168.2.4 and
192.168.2.5
Traffic Type
Select the traffic type of the packets that this rule
will apply to. We list some popular applications
here to ease the configuration. You also can get
the same result by using other parameters, for
example source or destination port number, if
you are familiar with the application protocol.
Protocol
Select the protocol type of the packets that this
rule will apply to.
Source Port Range
Enter the source port range of the packets that
this rule will apply to. You can assign a single
port number here or assign a range of port
numbers by assigning the first port number and
the last port number of the range. The two
numbers are separated by a dash “-“, for
example “101-150” means from port number 100
to port number 150 – the range of 50 port
numbers.
Destination Port Range
Enter the destination port range of the packets
that this rule will apply to. You can assign a
single port number here or assign a range of
port numbers by assigning the first port number
and the last port number of the range. The two
numbers are separated by a dash “-“, for
example “101-150” means from port number 100
42