Ericsson R520 - Manual (Page 68)

No
t f
or
C
om
m
er
ci
al
U
se
Er
ic
ss
on
M
ob
ile
C
om
m
un
ic
at
io
ns
A
B
68Setting up WAP and E-mail
Data rate – select the speed you want for the connection.
Dial type – select analogue or ISDN connection.
If you want to change access type, you have to create a new data
account and select the access type you want to use.
GPRS and GSM Data Settings
If you have selected GPRS as the access type, the Preferred service
should be set to GPRS&GSM. An icon may then appear in the display
telling you that GPRS is within range. See “Icons” on page 141. If
you have selected GSM data as the access type, you should select
GSM only as the preferred mode. This setting is valid for all data
accounts.
To select a preferred service
1. Scroll to Settings, Y ES , Data comm., Y ES , Pref. service, Y ES .
2. Select GPRS&GSM or GSM only.
Tip: To see the status of GPRS coverage and connection, slide the
volume key up or down from standby to enter the Status menu and
then scroll to GPRS.
Data Counters
To check how much data you have sent and received, using GPRS,
scroll to Call info,
Y ES , Data counters, YES , and select Last session
or Total data.
When you browse WAP pages, you use a certain WAP profile. A WAP
profile is a collection of settings that determines, for example, how
you connect to the mobile Internet. You could, for example, have one
WAP profile for mobile e-commerce and another one for general WAP
browsing. You can have five WAP profiles. By switching WAP profile,
you also switch settings in a simple way.
There are three ways in which WAP profile settings can be entered
into your phone:
• The settings are already entered when you buy the phone.
• You receive the settings in a text message, for example, from
http://mobileinternet.ericsson.com.
• You enter the settings manually.
WAP Profile Settings