Ericsson R520 - Manual (Page 81)

No
t f
or
C
om
m
er
ci
al
U
se
Er
ic
ss
on
M
ob
ile
C
om
m
un
ic
at
io
ns
A
B
Data Calls 81
Receiving Data Calls – One Number
If you have a SIM card that does not support separate voice and data
numbers, the phone does not recognize the type of incoming call.
If you want to receive a voice or data call, you first have to set the
phone to one of these options in the Next incoming sub-menu.
To receive a voice or data call
1. Scroll to Call info, Y ES , Next call, Y ES , Next incoming, Y ES .
2. Select the call type you want (Voice, Data or Fax) and press YES
to confirm your choice.
3. Connect your phone to the computer.
4. Answer the call from within the program.
Once you have set your phone for a specific incoming call, it remains
set until you change it.
You can use the phone’s built-in modem to send or receive e-mail
messages from your PC.
To send e-mail messages from your PC
1. Install modem drives on your PC for your phone’s built-in modem.
You do this from the CD that comes with your phone.
2. In the Dial-Up Networking service on your computer, select
Ericsson R520 as the modem you wish to use.
3. Place your mobile phone next to your computer. Make sure it is
connected according to the instructions for the transfer method
you are using.
4. Start your e-mail program, then write and send a message.
To receive e-mail messages from your PC
1. Follow steps 1 and 2 above.
2. Start your e-mail program and open your Inbox to read your new
e-mail messages.
E-mail from Your PC