Ericsson R520 - Manual (Page 88)

No
t f
or
C
om
m
er
ci
al
U
se
Er
ic
ss
on
M
ob
ile
C
om
m
un
ic
at
io
ns
A
B
88 Voice Control
To change a profile using voice commands
1. From standby, press and hold Y ES until you hear a tone.
2. Release Y ES , lift the phone to your ear and say the profile
command for the required profile. The profile command is played
back to you and the current profile is changed.
Instead of using the voice memo button, you can record voice commands
to start a voice memo recording or to listen to voice memos.
To turn on and record voice memo commands
1. Scroll to Settings, Y ES , Voice control, Y ES , Voice settings, Y ES ,
Voice memo, Y ES .
2. Select On and press Y ES .
3. Instructions appear. Press Y ES .
4. Lift the phone to your ear, wait for the tone and say “Record”.
Press
Y ES if it sounds OK or NO to repeat the step.
5. After the next tone, say “Play” and press YES to save your
recordings.
To start a voice memo recording using a voice command
1. From standby, press and hold Y ES until you hear a tone.
2. Release Y ES , lift the phone to your ear and say “Record”. The
voice command is played back to you and a tone indicates that the
recording has begun.
To end the recording, press
Y ES .
To listen to voice memo recordings using a voice command
1. From standby, press and hold Y ES until you hear a tone.
2. Release Y ES , lift the phone to your ear and say “Play”. The voice
command is played back to you.
3. Listen to your voice memo recordings. Press NO to stop.
You can record a magic word and use it as a voice command to allow
totally handsfree access to voice control. Instead of pressing and
holding
Y ES , you say the magic word and then one of your recorded
voice commands. The magic word is especially suitable when driving
a car with a car handsfree kit installed. You can also use the magic
word when the phone is connected to a portable handsfree or when
the speakerphone is activated.
Recording Voice Memos
The Magic Word