EverFocus EDR410H - Manual (Page 21)

2.2 Hard Disk Drive Installation
the machine. The hard disk drive default setting is initially set to master. The second
step
process
he hard disk drive will not be detected. Follow the previous steps
for the second hard drive or second empty sleeve.
ƒ No ot locked in with the key a system
The first step in installing the hard drive is to insert the hard drive sleeve into
is to insert the key provided and turn the tray key to the lock position. If this
is ignored t
te: If the Hard Disk Drive is n
loading screen will keep flashing and the DVR will not go into
record mode. This is because the Hard Drive is not being
recognized.
2.3 Final Install Process
installation you are read to turn on the DVR. Simply plug the power source you
installed earlier. The POWER LED lights will light up if power is normal. The next
step is to se
t
Diagram 2.2 shows 3.5“ Hard Drive
Once you have completed the basic wiring installation and the hard disk drive
t up he menu options for the DVR.
13