EverFocus EDR410H - Manual (Page 80)

Chapter
Call O
details on how to setup the CALL
nd the CALL MENU will pop up as
elow
Diagram 7.1
In CALL MENU, we define:
(1) SEQ: Sequence display on the call monitor. Press SEQ to switch “ON”
or “OFF” of the sequence status.
(2) OSD: Channel name display on the call monitor. Press DISPLAY to
switch “ON” or “OFF” of the OSD status.
(3) CAMERA: The display camera in the call monitor.
(4) QUAD DISPLAY: Display quad in the call monitor. Jog Dial to enable
(“YES”) or disable (“NO”) QUAD DISPLAY on the call monitor.
verview
This chapter will try to give you
MENU on the DVR. Press the CALL key a
b
.
7
72