EverFocus EDR410H - Manual (Page 7)

Safety Precautions
ƒ Refer all work related to the installation of this product to qualified service personnel or
system installers.
ƒ Do not block the ventilation opening or slots on the cover.
ƒ Do not drop metallic parts through slots. This could permanently damage the appliance?
Turn the power off immediately and contact qualified service personnel for service.
ƒ
Do not attempt to disassemble the appliance. To prevent electric shock, do not remove
screws or covers. There are no user-serviceable parts inside. Contact qualified service
personnel for maintenance. Handle the appliance with care. Do not strike or shake, as this
may damage the appliance.
ƒ
Do not expose the appliance to water or moisture, nor try to operate it in wet areas. Do take
immediate action if the appliance becomes wet. Turn the power off and refer servicing to
qualified service personnel. Moisture may damage the appliance and also cause electric
shock.
ƒ
Do not use strong or abrasive detergents when cleaning the appliance body. Use a dry cloth
to clean the appliance when it is dirty. When the dirt is hard to remove, use a mild detergent
and wipe gently.
ƒ Do not overload outlets and extension cords as this may result in a risk of fire or electric
shock.
ƒ
Do not operate the appliance beyond its specified temperature, humidity or power source
ratings. Do not use the appliance in an extreme environment where high temperature or
high humidity exists. Use the appliance at temperature within indoor type DVR for 0 o C ~
+40 o C and a humidity below 90%. The input power source for this appliance is
AC100~240V.