EverFocus EDR410H - Manual (Page 59)

3.11.3 NO HDD
In D, we define:
Diagram 3.21
¾ BUZZER: NO HDD buzzer.
ENABLE: To enable a buzzer when no HDD has been found.
DISABLE: To disable NO HDD buzzer.
¾ ALARM OUTPUT: This will transmit a signal to another device. The
setting of alarms are NONE = not activated and 1 = one output
signal transmitted. To change this, simply use the Jog Dial on the DVR.
Press the Enter key to make your selection.
¾ ALARM DURATION: Buzzer noise and event record duration of an
alarm, from 1 sec to 99 seconds. The default value is 5 seconds.
¾ NETWORK ALARM:
YES: To enable network alarm.
NO: To disable network
NO HD
alarm.
51