5 monitor display – EverFocus EDR410H User Manual
Page 17
1.5 Monitor Display
1. Channel tag
2. Event sign
3. Select sign
2. Event sign
4. Play status bar
5. Record status bar
The status information of the cameras or machine will show up, and be located at different
places on the screen.
Channel tag: A channel tag indicates the channel name of the screen.
1
2
Event sign: Event signals which are small icons with a capital letter and red
background show the events on each screen. There are 4 different signals
which are:
: Alarm event has taken place where the camera is located. In order to show
the video to a corresponding alarm, setting a FOCUS CAMERA in
ALARM SETUP MENU is necessary.
: Motion event has taken place and will shows up when the camera’s
MOTION is enabled in MOTION SETUP MENU.
: Video loss event. Video loss event only shows when the camera’s VLOSS is
enabled in VLOSS SETUP MENU, and the camera signal is lost.
: Sequence sign shows up when the display is in the sequence mode. The
sequence display is located on display with a “
＊” sign in 4, 7, Full screen
and PIP (picture in picture) display mode. The sign will replace “
＊”
sign in the display when sequence occurs.
M
A
V
S
S
9