EverFocus EDR410H - Manual (Page 27)

3.2 Camera Setup Menu
Diagram 3.4 is a sc
enu will walk
you through setting rt modes, and
recording quality. I s are defined
as:
¾ TITL h camera input.
Titlin o change this,
simpl y to make your
select
A,B,C,D,E,F,G,H,I,J,K,L,M,N,O,P,Q,R,S,T,U,V,W,X,Y,Z,
¾ PTZ ID: Select PTZ ID/Address from 001~255 or OFF. The default
value is 10+N where N is camera’s number. This ID must be the same
as the ID used in PTZ Dip Switch. To change this, simply use the Jog
Dial on the DVR. Press the Enter key to make your selection.
¾ INSTALL/COVERT: For installation of camera; select “ON” to
enable a camera, and “OFF” to disable it. Please make sure to stop
Diagram 3.4
reen shot of the CAMERA SETUP MENU. This m
e up the Camera Recording Speeds, Camera titles, cov
n the CAMERA SETUP MENU the following field
E: The title setting allows you to assign a title to eac
T g with 12 characters is supported in each channel.
y use the Jog Dial on the DVR. Press the Enter ke
ion. The available alphanumeric characters are:
0,1,2,3,4,5,6,7,8,9,
( ) . , + - / and an empty space.
19