EverFocus EDR410H - Manual (Page 56)

3.11 Warning Setup Menu
larm go off. In the Warning Setup
enu the following fields are defined as:
.11.1 FAN FAULT
In FAN
¾
ENABLE: To enable a buzzer when the fan does not work.
¾ ALARM OUTPUT: This will transmit a signal to another device. The
Press the Enter key to make your selection.
Diagram 3.19
Diagram 3.19 is a screen shot of the Warning Setup Menu. This menu is to set the
warning system settings. If any critical errors were to arise, this portion of the menu
would be for error handling. For example if you set the fan buzzer on and the fan
wasn’t able to turn on then you would here an a
M
3
FAULT, we define:
BUZZER: Fan buzzer. To change this, simply use the Jog Dial on the
DVR. Press the Enter key to make your selection.
DISABLE: To disable fan buzzer.
setting of alarms are NONE = not activated and 1 = one output
signal transmitted. To change this, simply use the Jog Dial on the DVR.
48