Epson Action Laser - Manual (Page 130)

Maintenance Messages
Changing the drum unit and drum replacement cartridge
Note: Before changing the drum, you should locate some alcohol
to use for cleaning purposes.
1. Turn off your printer. (To finish your print job first, see the
instructions above on completing your print job before changing
the drum.)
2. Raise the top cover of your printer by lifting up on the latch.
WARNING: Opening the printer exposes the fusing unit,
the orange area marked with a caution label. This unit is
very hot, so be careful not to touch it.
3. Remove the basket and place it on a flat surface.
6-14 Maintenance and Transportation