Epson Action Laser - Manual (Page 47)

Testing the Printer
3. To perform the font print test, press the
CONTINUE/RESET
and the
SPECIAL
buttons at the same time.
4. When you release the buttons,
FONT PRINT
appears on the
display and
the
printer outputs a font print test.
A portion of the font print test printout is shown below.
Internal I00 COURIER
I01 COURIER
I02 COURIER
I03 COURIER
I04 COURIER BOLD
I05 COURIER BOLD
I06 COURIER BOLD
I07 COURIER BOLD
I08 LINE PRINTER
10 12
10 12
10 12
10 12
10 12
10 12
10 12
10 12
16.6 8.5
8U
10U
11U
ON
8U
10U
11U
ON
8U
Status print test
The status print test gives you information on current printer
settings, such as paper size, number of copies selected, and font
source and number.
Follow the steps below to perform the status print test:
1. Be sure that your printer is plugged in and the power is on.
2. Be sure that your printer is off line.
(OFF LINE
appears on your
display.) If not, press
the ON LINE
button to set the printer off
line.
Testing and Connecting Your Printer 2-9