Epson Action Laser - Manual (Page 57)

The Control Panel
I N I T I A L I Z E
ON LINE [LTR]
OFF LINE [LTR]
PLEASE WA I T
PROCESSING
PUSH MANUAL KEY
RESET
SELF TEST
STATUS PRINT
This message appears when you reset
printer functions to the original factory
default settings. This procedure is
described in the section on initializing
SelecType in this chapter.
This message appears when the printer is
on line, ready to receive data. The current
paper size is shown on the right (for
example, L TR for letter size paper).
This message appears when the printer is
off line, unable to receive data. The current
paper size is shown on the right.
This message appears for approximately
60 seconds while the printer warms up and
completes self-diagnostic checks.
This message appears while the printer is
receiving data and printing. It changes to
ON L I NE before the paper is ejected.
This message appears during manual
printing. See Chapter 4 for instructions on
manual feed printing.
This message appears when you reset
printer functions to their SelecType
settings.
This message appears during the self test,
which prints a character pattern that lets
you check the print density and see
whether your printer is operating correctly.
This message appears during the status
print test, which gives you information on
current printer settings.
Using the Printer 3-3