Energy Speaker Systems indoor / outdoor loudspeaker - Manual (Page 10)

FINAL ADJUSTMENTS
(1) After checking that the speaker is in-phase and works correctly, angle the speaker
for the best sound.
(2) Hand tighten the bracket knobs only . Power tools may over-tighten the knob, and
strip the threads of the insert.
(3) Check that the entire installation is safe and secure.
CABINET CARE
Cabinets should be gently wiped clean from time to time with a damp cloth to remove
any dirt or stains.To remove dust from the grille, use the brush attachment on your
vacuum cleaner or a slightly dampened sponge.
T e m p e s t o w n e r s m a n u a l
9
+
+
+
+
+
+
+
+ +
+
+
+
+
+
+ + +
+
+
+
+ –
–
–
–
–
– –
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
+
+
+
IMPORTANT:
CONNECT POSITIVE WIRE
TO THE POSITIVE TERMINAL
OF YOUR AMPLIFIER OR RECEIVER
CONNECT NEGATIVE WIRE TO
THE NEGATIVE TERMINAL OF
YOUR AMPLIFIER OR RECEIVER
POSITIVE (RED) INPUT
BINDING POST.
NEGATIVE (BLACK)
INPUT BINDING POST.
INPUT TERMINAL CUP
– +
Diagram 2: CONNECTING YOUR SPEAKERS