Energy Speaker Systems indoor / outdoor loudspeaker - Manual (Page 9)

CONNECTING YOUR "TEMPEST" SPEAKERS
The following will assist you in connecting the individual speakers to your amplifier
or receiver:
(1) First turn your amplifier or receiver off to avoid damage which may result from
accidental shorting of the speaker leads.
(2) Correct phase polarity is critical for proper stereo imaging and bass performance.
The red (+) terminal on your amplifier or receiver must be connected to the red
(+) terminal on your speaker.The same applies for the black (-) terminal.
(3) Connect one loudspeaker at a time to ensure proper connection of left and right
channels. Make sure all wires are firmly fastened.
(4) If you notice a great lack of bass and/or central image focus, double check your
connections for proper polarity.
o w n e r s m a n u a l T e m p e s t
8
Diagram 3: EAVE MOUNTING