Energy Speaker Systems indoor / outdoor loudspeaker - Manual (Page 5)

RECOMMENDED WIRING
& AMPLIFIER POWER
Selection of Proper Wire:
We recommend the use of high quality speaker cable.The speaker cable you select will
ideally be fitted with high quality connectors such as 5/16” (8mm) spade lugs. In most
installations, ordinary lamp cord (16-18 gauge) has enough resistance to degrade the
signal between amplifier and speakers, particularly in lengths over 10-feet (3m).
Amplifier Requirements:
Energy loudspeakers have been designed to be driven to high listening levels with
moderate power, while at the same time being capable of handling the power output
of large amplifiers.
PAINTING THE "TEMPEST"
"Tempest" can be painted to match its surroundings.To preserve the acoustic
qualities of the grille, please paint the grille according to the grille painting instructions.
Pick a paint that is appropriate for the mounting location; there are interior and
exterior varieties. If you are not sure what paint to use, consult a paint store or a
professional painter.
Tools Required:
• A spray can of sandable primer paint.
* The correct finish paint for the surroundings (oil or water based paint is fine).
• A paint brush or applicator if the paint is not in a spray can.
• A paper clip or a corkscrew (for removing the grille).
• Masking tape.
• 2 baffle paint masks (supplied).
• A damp cloth and a dry cloth.
o w n e r s m a n u a l T e m p e s t
4