Energy Speaker Systems indoor / outdoor loudspeaker - Manual (Page 11)

SPECIFICATIONS
RECOMMENDED
AMPLIFIER POWER
5- 100watts per channel
NOMINAL IMPEDANCE 8 Ohms
FREQUENCY RESPONSE 65 Hz to 21 kHz, plus or minus 3 dB (on axis)
SENSITIVITY 89 decibels for 2.83 volts of Pink Noise, measured at
1 meter on axis.
WIRING REQUIREMENTS Sixteen to eighteen gauge 2-conductor (unshielded or
shielded) wire for runs up to eighty feet. Fourteen gauge
2-conductor (unshielded or shielded) wire for runs up to
two hundred feet.
TEMPERATURE EXTREMES -50° to 200° Fahrenheit (-45° to 93° Celsius)
DIMENSIONS -W X H X D
(WITHOUT BRACKET)
7" x 10 " x 5 3/4"
18cm x 25.4cm x 14.6cm
(WITH BRACKET) 7 Wide x 10 " High x 6 1/2" Deep
18cm x 25.4cm x 16.6cm
WEIGHT 6 1/2Ib (2.9kg)
(SPEAKER AND BRACKET)
o w n e r s m a n u a l T e m p e s t
10
10"
25.4cm
5 3/4"
14.6cm
6 1/2"
16.6cm
7"
18cm
10"
25.4cm
Diagram 3: OVERALL DIMENSIONS