Eicon Networks 800-241 - Manual (Page 11)

Getting Started 11
Software Installation under Windows 95
Note: If you are using Windows 95 OEM Software Release 2 (OSR2) please
refer to the section “Software Installation under Windows 95 OEM Software
Release 2 (OSR2)” on page 12.
Note: After you have inserted the DIVA Mobile into your notebook,
Windows 95 detects the new hardware and recognizes it as EICON DIVA
Mobile.
1 From the Install New Hardware dialog box, select “Driver from disk
provided by hardware manufacturer.” Click OK.
2 Insert the DIVA for Windows 95 - Setup Disk. Enter the following path
(where A is your floppy drive letter):
A:\
3 Click OK. If this is the first time you are installing a modem on your
notebook, the Location Information dialog box will appear. The dialog
box asks you to enter information about your location (country code,
regional code, ...) Follow the instructions displayed on the screen.
When finished click OK.
4 Windows 95 will automatically detect the EICON DIVA Mobile V.34
modem and install the necessary software.
5 Windows 95 will automatically detect the DIVA Mobile ISDN adapter
and start installing the necessary software. When prompted, follow the
instructions displayed on the screen; when the Setup Wizard appears
go to the section “Using the ISDN Setup Wizard” on page 13 of this
guide and continue.
6 The Setup Wizard will copy all necessary files to your system. When
finished, it will prompt you to reboot your system.