Eicon Networks 800-241 - Manual (Page 34)

34 DIVA Mobile User’s Guide
AT Commands and Result Codes
Note: The AT commands for the V.34 modem are standard modem
commands which are realised via the hardware of DIVA Mobile.
Factory default settings are stored in permanent memory. Italicized n or x
denotes options to be supplied by user or software.
Command Function Default
A Go off-hook and attempt to answer a call. —
Bn Modulation Standard for 0 - 1200 bps B1
Dn Dial telephone number —
En Turn off command echo E1
Hn On/off-hook —
In Identification commands —
Mn Speaker control M1
Nn Automode detection off/on N1
On On-line and retrain control —
P Pulse dial —
Qn Result codes enable/disable Q0
Sn=x Set register n to decimal value x —
Sn? Get decimal value in register n —
T Tone (DTMF) dial —
Vn Result codes format: verbose/terse V1
Wn Extended result code format n W0
Xn Result code reporting options X4
Yn Long space disconnect Y0
Zn Recall stored profile n —
&Cn Carrier detect control &C1
&Dn DTR options &D2
&Fn Return all settings to factory default n —
&Gn Guard tone disable/enable &G0
&Kn Flow control settings &K3
&P0 Set pps pulse dial with 39%/61% make/break &P0
&Qn Connection mode &Q5
&Rn CTS control options &R1