Eicon Networks 800-241 - Manual (Page 9)

Getting Started 9
Installation
If you have installed a former version (only 1.0 or 1.1), or a former beta
version of DIVA for Windows 95, or if you use a former version of the
Microsoft ISDN Accelerator Pack, you may encounter conflicts due to
different versions. To avoid such conflicts, follow these steps before you
install the DIVA for Windows 95 software for the DIVA Mobile PC Card.
1 Close all applications. From the Control Panel start the System applet.
2 Go to the “Device Manager” tab and select “Network adapters”.
3 Remove the following two components:
“EICON ISDN Adapter”
“EICON WAN Miniport”
4 Click “OK”.
5 When you are asked to restart your computer, click “No”.
6 Run the DIVADEL.BAT program. Put the setup disk of DIVA for
Windows 95 into your disk drive and enter the following path:
“A:\DIVADEL.BAT”.
7 When prompted, click “OK” and restart your PC.
Note: To un-install versions later than 1.1, refer to the online help.
The steps in the following section show you how to install the DIVA Mobile
PC Card and DIVA for Windows 95 software. During the software setup, the
Windows 95 Setup Wizard will appear; follow the on screen instructions to
select and configure the ISDN options you need.
Note: The installation program may require access to Windows 95 *.cab
files; make sure these files are available either from the Windows 95 CD or
on your hard disk drive. Just enter the path to the files. You should also read
your Notebook documentation and the readme file on the DIVA for
Windows 95 - Setup disk.