Eaton Electrical D77A - Manual (Page 59)

Intelligent Technologies ( IT.) D77A I/O Module Products
MN05002001E For more information visit: www.EatonElectrical.com 51
Table 48: 0x8006 (32774) Slave Address
Table 49: 0x8007 (32775) Production Destination
Table 50: 0x8008 (32776) Device ID Tag
Table 51: 0x8009 (32777) Production Interval
Table 52: 0x800A (32778) Consumption Interval
Table 53: 0x800B (32779) Parameter List
Table 54: 0x800C (32780) Production List
Table 55: 0x800D (32781) Consumption List
Table 56: 0x800E (32782) Languages Supported
Size Description
1 byte This parameter specifies the address used by a Master for data transfers in the Master/Slave Data Protocol.
The default value must be 0x00 (unconfigured), requiring a Master to set this value prior to using the Master/
Slave Data Protocol.
Size Description
2 bytes This parameter specifies the destination Node ID to be used by a device in either the Simple System or Wire
Replacer Data Protocols. The MSB indicates the Group ID; the LSB indicates the Member ID.
An Initial Value of 0x0000 indicates an unconfigured state. In this state, a device assumes a current value equal
to its Group ID and a Member ID of 0x00. This results in its Production Data being targeted at all members of its
Group.
Size Description
32 bytes This parameter specifies the 32-character ASCII string ID tag assigned to a device, pre-assigned at the factory
but can be set by the user.
Size Description
2 bytes This parameter specifies the rate, in milliseconds, at which a producing device generates a Data Protocol
message in either Simple System or Wire Replacer mode.
A value of 0 disables this timer.
Size Description
2 bytes This parameter is the value to which the consumption timer is set whenever there is a set of the current value of
any parameter on the consumption list.
Expiration of this interval causes the module to execute communications loss behavior.
A value of 0 disables this timer.
Size Description
92 bytes This read-only list specifies the n QCPort Parameters that a device supports.
Size Description
2 bytes This 2n-byte read-only list specifies the n QCPort Parameters included in a device’s QCPort Data Parameter
0x0001, Production Data.
Setting Parameter Attribute 0x09, “Production List Member,” to TRUE, designates a Parameter’s membership in
this list. Only Parameters supporting Attribute 0x09 are eligible for inclusion in this list.
Ordering of Parameter IDs in the Production List is based first on Parameter data size and then sequentially
within Parameters of like size. For example, all Parameters with an even number of bytes would appear first
sequentially, followed by Parameters with an odd number of bytes.
Size Description
2 bytes This 2n-byte read-only list specifies the n QCPort Parameters included in a device’s QCPort Data Parameter
0x0002, Consumption Data.
Setting Parameter Attribute 0x0A, “Consumption List Member,” to TRUE, designates a Parameter’s membership
in this list. Only Parameters supporting Attribute 0x0A are eligible for inclusion in this list.
Ordering of Parameter IDs in the Consumption List is based first on Parameter data size and then sequentially
within Parameters of like size. For example, Parameters with an even number of bytes would appear first
sequentially, followed by Parameters with an odd number of bytes.
Size Description
n bytes This is a list of languages supported in the product. It consists of a list of bytes, each representing a different
language.
0x00 — English
0x01 — Spanish
0x02 — French
0x03 — German
0x04 — Italian