5 power supply requirements, Power supply requirements – Emerson 2400S User Manual
Page 11
Installation Manual
7
Transmitter Orientation and Power Supply
P
o
wer Su
ppl
y
I/O
W
irin
g
– DP
an
d
DN
I/
O W
iri
n
g
– AN
Be
fo
re
Y
o
u
Begin
Figure 2-2
Rotating the user interface module on the transmitter
2.5
Power supply requirements
Model 2400S Analog and Model 2400S PROFIBUS-DP transmitters can accept either AC or DC
power. The transmitter automatically recognizes the source voltage. Power supply requirements are:
•
AC power:
-
85–265 VAC
-
50/60 Hz
-
4 watts typical, 7 watts maximum
•
DC power:
-
18–100 VDC
-
4 watts typical, 7 watts maximum
The Model 2400S DeviceNet transmitter is powered from the DeviceNet network per the DeviceNet
specification. There is no need to connect separate power-supply wiring for the Model 2400S
DeviceNet transmitter. Skip to Chapter 4.
4 × Transmitter
housing cover screws
(captive)
2 × User interface
screws (captive)
Transmitter housing
cover
User interface module
*
Transmitter with aluminum housing shown.
Procedure for stainless steel housing is similar.