High End Systems Roadster Orbital Head System - Manual (Page 17)

Roadster Orbital Head System User Manual 7
Chapter 2:
Setup and Configuration
Inspecting the Fixture
The following components are shipped as the Roadster Orbital Head system:
Hardware
• Orbital Head fixture
• Power Hub
• Mounting Bracket for Christie projector
Cabling
• 4-pin XLR Power hub cable
• RS 232 cable
• US power cable
• European power cable
Unpack all components and verify that it is undamaged. Inspect both the outside of the
components for physical damage and the optical surfaces of the Orbital Head. If the product is
damaged or there are items missing, notify both the shipping agent and your sales agent
immediately.
Save All Shipping Materials
Do not discard shipping materials. Packing materials are specifically designed to protect the
product during transport.
High End Systems® assumes no responsibility for products that are damaged during
transport. Return a product for repair in its original shipping carton and packing materials.
Before sending anything to the factory, call your High End Systems dealer/distributor for a
Return Material Authorization (RMA) number. The factory cannot accept any goods shipped
without an RMA number.
Installing Power Cord Caps
The Power Hub for the Orbital Head System may ship without an attached power cord cap.
Different locations (even within the same country) may require a different power cord cap to
connect the fixture to a power outlet.
Because of the variety of power cord caps used worldwide, High End Systems, Inc. cannot
make specific recommendations for the power cord cap.