High End Systems Roadster Orbital Head System - Manual (Page 29)

CHAPTER 3
Operation and Maintenance
Roadster Orbital Head System User Manual 19
Unlocking the Menu System
To unlock the menu system, press and hold the Menu button until the display changes to the
2-line format. The menu system is protected against inadvertent menu changes by requiring
the Menu button to be held for a few seconds before allowing entry to the menus. DMX
Address Menu is the first option on the top menu level.
Exiting the Menu System
To exit the menu system, keep pressing the Menu button to back out of each menu level until
the High End Systems logo appears. The word AUTOLOCK will appear briefly on the display to
indicate the fixture’s software is “locking” the display. The display switches back to the large
8-character format and, after a few seconds, begins the standard display for the locked mode
as described above.
Menu Map
Use the following table to navigate the menu options on the Power Hub.
Level 1 Level 2 Level 3 Option/Setting Description/Notes
enters /exits Menu System and moves up levels
moves between items on same level. selects
scrolls between values
selects
DMX ADDRESS
MENU SET DMX START CHANNEL: ###
1-512
Selected value becomes the first
DMX value in the range for that Mirror
Head on a DMX 512 link.
SET
PARAMETERS
MENU
FACTORY DEFAULT
SETTINGS: ###
ON Reverts Mirror Head to default setting
OFF
Indicates a factory default has
changed
DISPLAY LEVEL:
ON Turns display on
OFF
Display fully dimmed when menu is
locked
MIRROR 2 QUICK PATH:
ON
Allows mirror to take the shortest path
to the selected position
OFF Disables the Quick-Path feature
FIXTURE
MODE MENU
PROTOCOL MODE: STANDARD Factory default setting
CROSSLOAD
FIRMWARE:
NO Safe setting
YES
Uploads Catalyst software to all other
Catalyst fixtures on the link