High End Systems Roadster Orbital Head System - Manual (Page 31)

CHAPTER 3
Operation and Maintenance
Roadster Orbital Head System User Manual 21
DMX Address Menu
DMX Address is the top level menu selection used to set the fixture’s DMX start channel. Use
this menu option, to change the existing DMX start channel to another DMX start channel.
Setting a DMX Start Channel
To set the DMX start channel on the Power Hub:
1. Press the Menu button to unlock the menu system or to move back up the system to the
top level menus. DMX ADDRESS MENU is the first menu item at the top level.
1. Press the Enter button to select. The display will show SET DMX START CHANNEL:###.The
display will show the start channel currently assigned to the fixture.
2. Use the up and down arrows on the Navigation button to select a new DMX start channel,
if necessary. The display will flash a new option ready for selection.
Note: The last valid Start channel for a fixture is based on the channel
range required by fixture’s module configuration. The last valid
Start channel for the Orbital Head System 507 (512 –6+1).
3. Press the Enter button to accept the new DMX Start channel.
Note: If the Enter button is not pressed, the old value will remain selected
after exiting the menu.
Set Parameters Menu
The Set Parameters menu sets all factory options to their default settings or changes the
factory options individually.
Display Level
Use this menu option to turn the display on or off.
To change display level:
1. Press the Menu button to unlock the menu system or to move back up the system to the
top level menus.
2. Using the left and right arrows on the Navigation button, scroll through the top level to
SET PARAMETERS MENU and press the Enter button to select.
3. Using the left and right arrows on the Navigation button, scroll to the DISPLAY LEVEL.
4. Using the up and down arrows on the Navigation button, choose ON to turn the display on
or OFF to dim the display and press the Enter button to store the option.