Harman-Kardon DIGIMAX 350SE User Manual
Page 24
PREPARATION
Selecting the date and time
You can record the date and time with the image data in the CF CARD when you take an image.
You will need to check and select the correct Date / Time when :
The camera is used for the first time.
The batteries have been removed for a period longer than 1 hour.
1
Turn on the power by pressing the Power button.
2
Set the mode dial to the SETUP mode ( ).
3
The setup menu will show on the LCD monitor.
4
Move to the SETUP 2/3 menu by using the RIGHT
button(
) on the 5-function button.
5
Move to the DATE SETUP by using the DOWN button(
) on
the 5-function button and press the RIGHT button(
).
A menu will then be displayed on the LCD monitor as shown
alongside.
6
Select correct Date / Time by using the 5 -function button and press the OK button to update Date /
Time. SETUP 2/3 menu will be displayed on the LCD monitor.
7
The setting is completed. The camera can now be used with the selected camera mode.
5-function button
SETUP 2/3
BACK :
SET : OK
2002/03/01
00 : 00
DATE SETUP
IMPRINT
DATE TYPE
USER SET
Reference
The selection range for date/time setup covers from 2001~2050.(It is automatically programmed to allow for a leap year/ month)
It is originally set as [2002/03/01 00:00]