Harman-Kardon DIGIMAX 350SE - Manual (Page 78)

CONNECTING TO AN EXTERNAL MONITOR
Connecting to an external monitor
In STILL IMAGE or PLAY mode, you can view the stored images or movie clips by
connecting the camera to an external monitor via the video cable. When the camera is
connected to an external monitor, the LCD monitor will be turned off automatically.
- When the camera is connected to a external monitor, the menu will be visible on the
external monitor and the working of the menu is same as the LCD monitor.
Selecting the Video output type
You can select an NTSC or PAL video output signal, depending on the external
equipment (monitor or TV) that you wish to connect to.
- Refer to page 77 [VIDEO OUT] about selecting the video output from the camera.
Reference
When using a TV as an external monitor, you will need to select the external or AV channel
of the TV.
There will be a digital noise on the external monitor, but it is not malfunction.
If the image is not in the centre of the screen, use the TV controls to centre it.