Harman-Kardon DIGIMAX 350SE - Manual (Page 39)

ADV
ANCED
SETTING UP THE SHOOTING FUNCTION
METERING / Down button
When the menu is displayed on the LCD monitor, pressing the button makes the cursor shift to down or
changes the sub menu.
When the menu is not displayed on the LCD monitor, the
button operates as the METERING button.
This button can be used to obtain the right exposure.
1. Turn the camera power on.
2. Rotate the mode dial to the shot mode.
(Still image, Night scene, Movie clip).
3. Do not turn the LCD monitor off.
4. If the desired metering mode indicator is displayed on
the LCD monitor when pressing the METERING button,
the function is ready for recording.
5. Take a picture.
< Selecting CENTER metering >
METERING mode indicator
Center Weighted Average metering :
Exposure will be calculated based on an average of the light available in the
image area. However, the calculation will be biased towards the centre of
the image area
CENTER metering :
Use this function when there is backlight or when photographing a subject
that has little contrast. In backlighting conditions adjust the light metering to
suit the subject matter.
Reference
The default of the metering mode is Center Weighted Average metering
Adjustments to the metering will not change until the camera is switched off.