Harman-Kardon DIGIMAX 350SE - Manual (Page 68)

SETTING UP THE CAMERA SYSTEM
1. Turn the camera on.
2. Rotate the mode dial to SET UP mode ( ).
3. A menu will display on the LCD monitor.
4. Press the DOWN button ( ) and select [FILE NAME].
5. Shift the cursor to the [FILE NAME] sub menu by
pressing the RIGHT button ( ).
6. Select the desired sub menu by pressing the UP ( ) /
DOWN ( ) buttons. The default is SERIES.
7. After selecting the desired sub menu, press the OK
button to confirm the setting.
SETUP 1/3
BACK : SET : OK
RESET
SERIES
FORMAT
FILE NAME
POWER OFF
LANGUAGE
Reference
The first stored folder name is 100SSCAM , and first name is S3500001
Whenever you store an image, the file number is increased by 1.
The file number is named from S3500001 to S3509999 automatically, 9999 files will be
stored in a folder. Using SERIES, the sequence starts at 100SSCAM and increases in
increments of 1. (e.g. : 101SSCAM, 102SSCAM…..)
The files used with the CF CARD conform to the DCF (Design rule for Camera File system)
format.