To turn the redial on busy option on or off, To turn the redial on no answer on or off, Using billing codes – HP 3300mfp User Manual
Page 102: To turn billing codes on or off, Changing the v.34 setting, To turn the v.34 setting on or off
100 7 Faxing
EN
To turn the redial on busy option on or off
The product is set to redial busy numbers five times automatically.
1
Press menu/enter.
2
Use the < or > button to select
Fax Setup
and press menu/enter.
3
Use the < or > button to select
Fax Send Setup
and press menu/enter.
4
Use the < or > button to select
Redial On Busy
and press menu/enter.
5
Use the < or > button to select
On
or
Off
and press menu/enter.
To turn the redial on no answer on or off
If this option is turned on, the product is set to redial on no answer one time automatically in the
U.S. and Canada, and two times automatically for all other countries/regions.
1
Press menu/enter.
2
Use the < or > button to select
Fax Setup
and press menu/enter.
3
Use the < or > button to select
Fax Send Setup
and press menu/enter.
4
Use the < or > button to select
Redial-No Answer
and press menu/enter.
5
Use the < or > button to select
On
or
Off
and press menu/enter.
Using billing codes
If the billing codes feature has been turned on, the user will be asked to input a billing code for
each fax. The billing number will be credited for each fax page that is sent. This includes all types
of faxes except for poll receive, fax forwarding, or PC downloaded faxes. For an ad hoc group or a
group dial fax, the billing number will be credited for each successful fax sent to each destination.
The default setting is off. To print a report showing the total for each billing code, see
.
To turn billing codes on or off
1
Press menu/enter.
2
Use the < or > button to select
Fax Setup
and press menu/enter.
3
Use the < or > button to select
Fax Send Setup
and press menu/enter.
4
Use the < or > button to select
Billing Codes
and press menu/enter.
5
Use the < or > button to select
On
or
Off
and press menu/enter.
Changing the V.34 setting
V.34 is the modem protocol used by the product to send faxes. It is the worldwide standard for
full-duplex modems sending and receiving data across telephone lines at 1,200 or 2,400 bps. The
default setting for V.34 is on.
To turn the V.34 setting on or off
1
Press menu/enter.
2
Use the < or > button to select
Fax Setup
and press menu/enter.