Loading originals to copy or scan, To load originals onto the flatbed scanner – HP 3300mfp User Manual
Page 33
EN
Loading originals to copy or scan 31
Loading originals to copy or scan
Use these instructions to load originals into your HP LaserJet 3300 series product for copying or
scanning. For the best quality scans and copies, use the flatbed scanner. See
for guidelines on choosing original documents for scanning and copying.
If you purchased an HP LaserJet 3300 product and want to purchase an ADF, see
for more information.
To load originals onto the flatbed scanner
1
Make sure the ADF is free of media.
2
Lift the flatbed scanner cover.
3
Place the original document face down on the flatbed scanner with the top left corner of the
document located in the lower right corner of the glass.
4
Gently close the lid.
5
The document is ready to be copied or scanned.
CAUTION
To prevent damaging the product, do not allow the scanner lid to fall onto the flatbed scanner surface.
Always close the scanner lid when the product is not in use.
Top Edge