Humminbird 1155C - Manual (Page 55)

For more information, see Accessories Menu Tab: Using Screen Snapshot and Screen Snapshot
X-Press™ Menu.
Waypoint Thumbnails: On the Chart View, you can use the INFO key to view Screen Snapshot as Waypoint
thumbnails. Waypoints thumbnails are created while the Snapshot feature is turned on. They are linked to
snapshot waypoints. Before these snapshot waypoints are edited for the first time, they are assigned a
filename that begins with an S and is followed by several numbers, and are represented by the camera icon.
NOTE: You must have an MMC/SD card installed to store or view waypoint thumbnails. If you press the INFO
key while the cursor is on a snapshot waypoint and the MMC/SD card is missing, only the normal chart
information will be displayed.
When the cursor is active on the Chart View and snaps to one of these snapshot waypoints, a waypoint
thumbnail will be displayed. Pressing the INFO key while the cursor is near one of these snapshot
waypoints will make the full snapshot appear on the screen. Pressing the EXIT key will show the cursor on
the waypoint, with the waypoint thumbnail displayed.
Highlighted Screen Snapshot Thumbnail Time and Date where Snapshot was captured 1
Screen Snapshot Thumbnail 2
Unavailable icon 3
Information Box 4
Snapshot Name 5
6
Position where Snapshot was captured 7
Amount of space left on the card 8
Total amount of space on card 9
Screen Snapshot View
1
2
3
5 6 7
8
9
4
47