Humminbird 1155C - Manual (Page 72)

Simulator
Use the Simulator to learn how to use your 1100 Series™ before taking your boat on the water. The Simulator
is a very powerful tool that simulates on-the-water operation, providing a randomly-updated display. We
recommend going through this manual while using the Simulator, since all of the menus function and affect
the display the way they actually do when in Normal operation.
NOTE: At startup, while still on the Title screen (while the name of your Humminbird® model is still on the screen)
you must press the MENU key and then select Simulator manually to enter Simulator mode. Manually selecting
Simulator from the Start-Up Options menu allows you to pre-configure your Chartplotter for on the water
operation. Any menu changes you make will be saved for later use.
A Simulation message will appear on the display periodically to remind you that you are using the
Simulator.
Exit the Simulator by powering your 1100 Series™ off.
System Status
Use System Status to view system connections and to conduct a unit self-test.
The following screens are displayed in turn when you press the VIEW button when using System Status:
• Self Test
• Accessory Test
• GPS Diagnostic View.
Exit System Status by powering your 1100 Series™ off.
Simulator
64