HONDA 08E92-SNA-100B - Manual (Page 14)

14 of 21
AII 38216-38957 (0802) © 2008 American Honda Motor Co., Inc. - All Rights Reserved.
50. Wrap foam cushion tape to the vehicle 2-pin and
4-pin connectors and secure them with a wire tie.
Then, secure the vehicle harness with a wire tie.
Reconnect the vehicle 42-pin connector.
6D01292T
4-PIN
CONNECTOR
PORT
2-PIN
CONNECTOR
PORT
FOAM
CUSHION
TAPE
VEHICLE
HARNESS
WIRE TIE
VEHICLE 2-PIN
CONNECTOR
VEHICLE
4-PIN
CONNECTOR
FUSE BOX
ENGINE STARTER
HARNESS 2-PIN
CONNECTOR
ENGINE
STARTER
HARNESS
4-PIN
CONNECTOR
Pull the connector
and check that it
is locked securely.
49. Plug the engine starter harness 4-pin and 2-pin
connectors into the fuse box.
NOTICE Check that the engine starter harness 4-pin
and 2-pin connectors are connected to the fuse box
and they are locked securely. Loosely connected
connectors can cause engine stall during driving.
48. Disconnect the vehicle 42-pin, 4-pin and 2-pin
connectors.
6D01430T
FUSE BOX
VEHICLE 42-PIN
CONNECTOR
FUSE BOX
VEHICLE 4-PIN
CONNECTOR
VEHICLE 2-PIN
CONNECTOR
FRONT VIEW
VEHICLE 2-PIN
CONNECTOR
VEHICLE 4-PIN
CONNECTOR
LOCK
VEHICLE 42-PIN
CONNECTOR
www.collegehillshonda.com