HONDA 08E92-SNA-100B - Manual (Page 8)

8 of 21
AII 38216-38957 (0802) © 2008 American Honda Motor Co., Inc. - All Rights Reserved.
23. Measure the antenna cable as shown. Attach the
three foam cushion tapes to the antenna cable in
the measurement shown.
24. Using isopropyl alcohol on a shop towel, clean the
area where the antenna will attach. Allow the area
to dry before proceeding.
25. Remove the adhesive backing from the antenna,
insert the antenna plate under the roof liner, and
attach the antenna to the windshield aligning the
template.
26. Remove the template.
6D01240T
ANTENNA
CABLE
FOAM
CUSHION TAPE
ANTENNA
360 mm
(14 in.)
30 mm
(1.2 in.)
30 mm
(1.2 in.)
6D01250T
ROOF LINER Clean with
isopropyl alcohol.
TEMPLATE
ADHESIVE
BACKING
ANTENNA
PLATE
22. Using two pairs of needle-nose pliers, bend the
antenna plate according to the illustration and
measurement shown.
6D01222T
SCALE
ANTENNA
8 mm
(0.3 in.)
PLATE
15 mm
(0.6 in.)
NEEDLE-NOSE PLIERS
www.collegehillshonda.com