HONDA 08E92-SNA-100B - Manual (Page 15)

© 2008 American Honda Motor Co., Inc. - All Rights Reserved. AII 38216-38957 (0802)
15 of 21
53. Install the clip from the engine starter harness to
the fuse box bracket behind the fuse box.
6D01181T
ENGINE
STARTER
HARNESS
FUSE BOX
BRACKET
CLIP
FRONT
GROUND
BOLT (Reuse.)
ENGINE STARTER
HARNESS GROUND
TERMINAL
51. Connect the engine starter harness 18-pin
connectors with each other and secure them with
a wire tie to the vehicle harness.
52. Unplug the white vehicle 14-pin connector at the
front lower pillar behind the fuse box, and plug the
engine starter harness 14-pin connectors in
between. Attach the engine starter harness 14-
pin connector to the vehicle 14-pin connector.
6D01331T
ENGINE
STARTER
HARNESS 18-PIN
CONNECTORS
WIRE TIE
VEHICLE
HARNESS
6D01141T
VEHICLE WHITE
14-PIN
CONNECTOR
ENGINE
STARTER
HARNESS
14-PIN
CONNECTOR
VEHICLE WHITE 14-PIN
CONNECTOR
FUSE BOX
54. Remove the ground bolt from the vehicle. Secure
the engine starter harness ground terminal with the
ground bolt you just removed.
www.collegehillshonda.com