HONDA 08E92-SNA-100B User Manual

Page 6

Advertising
background image

6 of 21

AII 38216-38957 (0802)

© 2008 American Honda Motor Co., Inc. - All Rights Reserved.

13. Remove the sunvisor holders. Using a small flat-

tip screwdriver, push the hook, and turn the
holder 90°, then pull it out.

12. If equipped, use a small flat-tip screwdriver to

remove the left and right lens from the map light
console (four retaining tabs for each lens).
Remove the two bolts, and then release the map
light console.

6D01400T

SUNVISOR

HOLDER

SMALL

FLAT-TIP

SCREWDRIVER

MAP LIGHT

CONSOLE

14. Remove the cap from the left sunvisor (four

retaining tabs).

5217030T

4 RETAINING

TABS

CONNECTOR

LEFT

SUNVISOR

TORX

SCREW

CAP

5006010T

FRONT PILLAR

FRONT

PILLAR TRIM

PIN

WEATHERSTRIP

CLIP

LEFT FRONT

PILLAR TRIM

STRIKE POINT

CLIP

SHOP

TOWEL

RUBBER

MALLET

Strike perpendicularly

to the vehicle.

6D01390T

LENS

FRONT

BOLTS

4 RETAINING

TABS

LENS

MAP LIGHT

CONSOLE

17. Using a rubber mallet and a shop towel, gently tap

the left front pillar trim at the position shown to
release the clip. Gently tap the pillar trim just
below the “SIDE CURTAIN AIRBAG” mark.

16. Pull away the weatherstrip from the left front pillar

trim.

15. Remove the left sunvisor (two T25 Torx screws,

and unplug the vehicle connectors).

www.collegehillshonda.com

Advertising