HP QMS 4060 - Manual (Page 121)

Engine
4-87 Printer Configuration
Duplex H. Offset
Duplex V. Offset
Setting Default Paper
The default paper size is used when the selected paper size is
requested but the input tray is missing from the engine.
Default 100 (0.33"/.84 mm)
Notes Values above 100 move the image down.
Values below 100 move the image up.
Menu Administration/Engine/Image Alignment/Duplex H.
Offset
Choices 000-300 (0.00"/0 mm-1.00"/25.4 mm)
Default 100 (0.33"/.84 mm)
Notes Values above 100 move the image to the right.
Values below 100 move the image to the left.
Menu Administration/Engine/Image Alignment/Duplex V.
Offset
Choices 000-300 (0.00"-1.00")
Default 100 (0.33"/.84 mm)
Notes Values above 100 move the image down.
Values below 100 move the image up.
Menu Administration/Engine/Default Paper
Choices Letter, A4
Default Letter