HP QMS 4060 - Manual (Page 89)

Communications
4-55 Printer Configuration
Default Job Priority
Allows you to specify which jobs are printed first, according to the
interface through which they are received, when jobs are received
simultaneously.
Binary Fixed—Enables binary communications
protocol (BCP). Print jobs cannot change this setting
through PostScript operators. Data in the printable
ASCII range also prints.
QBinary (Quoted Binary)—Enables quoted binary
communications protocol. Print jobs can change this
setting through PostScript operators. Data in the
printable ASCII range also prints. Use the special
quoting mechanism (see the following section) for the
special characters and ^D (EOF).
QBinary (Quoted Binary) Fixed—Enables binary
communications protocol (BCP). Print jobs cannot
alter change this setting through PostScript operators.
Data in the printable ASCII range also prints. Use the
special quoting mechanism (see the following section)
for the special characters and ^D (EOF).
Default Normal
Notes See chapter 5, “Additional Technical Information,” for a
full discussion of PS Protocol.
Menu Administration/Communications/Network 2/Def Job
Prio
Choices 001-100 (highest-lowest priority)