Air index, Quick reference information, Specifications – HONDA GCV160 User Manual

Page 14: Tuneup

Advertising
background image

14

ENGLISH

Air Index

An Air Index Information hang tag/label is applied to engines certified
to an emission durability time period in accordance with the
requirements of the California Air Resources Board.

The bar graph is intended to provide you, our customer, the ability to
compare the emissions performance of available engines. The lower
the Air Index, the less pollution.

The durability description is intended to provide you with information
relating the engine’s emission durability period. The descriptive term
indicates the useful life period for the engine’s emission control
system. See your EMISSION CONTROL SYSTEM WARRANTY
(page 18) for additional information.

Quick Reference Information

** Actual amount will vary due to residual oil remaining in the engine. Always
use the dipstick to confirm the actual level (see page 9)

Specifications

GCV160

GCV190

Tuneup

Descriptive Term

Applicable to Emission

Durability Period

Moderate

50 hours (0–80 cc inclusive)

125 hours (greater than 80 cc)

Intermediate

125 hours (0–80 cc inclusive)
250 hours (greater than 80 cc)

Extended

300 hours (0–80 cc inclusive)
500 hours (greater than 80 cc)

1000 hours (225 cc and greater)

Fuel

Type

Unleaded gasoline with a pump octane
rating of 86 or higher (page 9).

Engine Oil

Type

SAE 10W-30, API SJ or later, for general
use. Refer to page 9. ** Refill amount:
0.35 ~ 0.41

l (12.0 ~ 13.5 oz)

Carburetor

Idle Speed

1,400 ± 150 rpm

Spark plug

Type

BPR6ES (NGK) (pressure washer
applications)
BPR5ES (NGK (all other applications)

Maintenance

Before each
use

Check engine oil level. Refer to page 9.
Check air filter. Refer to page 9.

First 5 hours

Change engine oil. Refer to page 9.

Subsequent

Refer to the maintenance schedule on
page 8.

Type

Recoil start

Electric start

Length x Width x Height

367 x 331 x 360 mm

(14.4 x 13.0 x 14.2 in)

367 x 354 x 360 mm

(14.4 x 13.9 x 14.2 in)

Dry weight

9.8 kg (22 lb)

11.6 kg (26 lb)

Engine type

4-stroke, overhead cam, single cylinder

Displacement
[Bore x Stroke]

160 cm

3

(9.8 cu in)

[64 x 50 mm (2.5 x 2.0 in)]

Net power
(in accordance with SAE
J1349)*

3.3 kW (4.4 hp) at 3,600 rpm

Max. net torque
(in accordance with SAE
J1349)

9.4 N•m (6.9 ft-lb) at 2,500 rpm

Oil capacity

0.55

l (0.58 US qt)

Fuel tank capacity

0.91

l (0.25 US gal)

Fuel consumption

1.1

l/h at 3,000 rpm

Cooling system

Forced air

Ignition system

Transistorized magneto

PTO shaft rotation

Counterclockwise

Charging system:

BBC types

12 Vdc, 0.15 A min. @ 2900 rpm

Flywheel brake types

12 Vdc, 0.20 A min. @ 2900 rpm

Type

Recoil start

Electric start

Length x Width x Height

367 x 331 x 368 mm

(14.4 x 13.0 x 14.5 in)

367 x 354 x 368 mm

(14.4 x 13.9 x 14.5 in)

Dry weight

12.3 kg (27.1 lb)

13.3 kg (29.3 lb)

Engine type

4-stroke, overhead cam, single cylinder

Displacement
[Bore x Stroke]

187 cm

3

(11.4 cu in)

[69 x 50 mm (2.7 x 2.0 in)]

Net power
(in accordance with SAE
J1349)*

3.8 kW (5.1 hp) at 3,600 rpm

Max. net torque
(in accordance with SAE
J1349)

11.3 N•m 8.3 ft-lb) at 2,500 rpm

Oil capacity

0.55

l (0.58 US qt)

Fuel tank capacity

0.91

l (0.25 US gal)

Fuel consumption

1.3

l/h at 3,000 rpm

Cooling system

Forced air

Ignition system

Transistorized magneto

PTO shaft rotation

Counterclockwise

Charging system:

BBC types

12 Vdc, 0.15 A min. at 2,900 rpm

Flywheel brake types

12 Vdc, 0.20 A min. at 2,900 rpm

* The power rating of the engine indicated in this document is the net power
output tested on a production engine for the engine model and measured in
accordance with SAE J1349 at 3600 rpm (net power) and at 2500 rpm (max
net torque). Mass production engines may vary from this value. Actual power
output for the engine installed in the final machine will vary depending on
numerous factors, including the operating speed of the engine in application,
environmental conditions, maintenance, and other variables.

ITEM SPECIFICATION

MAINTENANCE

Spark plug gap

0.7 ~ 0.8 mm

(0.028 ~ 0.031 in)

Refer to page 10.

Valve clearance (cold)

IN: 0.15 ± 0.04 mm

EX: 0.20 ± 0.04 mm

See your authorized
Honda dealer

Other specifications

No other adjustments needed.

POM31Z8B022.book Page 14 Monday, November 17, 2008 3:50 PM

Advertising