HP Photosmart Premium Fax C410 - Manual (Page 15)

Related topics
Install the software for a network connection
Wired (Ethernet) network
Before you connect the HP Photosmart to a network, make sure you have all of the
required materials.
A functional Ethernet network that includes a router, switch, or hub with an Ethernet
port.
CAT-5 Ethernet cable.
Although standard Ethernet cables look similar to standard telephone cables, they
are not interchangeable. There is a different number of wires in each one, and each
has a different connector. An Ethernet cable connector (also called an RJ-45
connector) is wider and thicker and always has 8 contacts on the end. A phone
connector has between 2 and 6 contacts.
A desktop computer or laptop on the same network.
NOTE: The HP Photosmart supports networks with automatic speed negotiation
capable of 10 or 100 Mbps.
To connect the product to the network
1. Remove the yellow plug from the back of the product.
2. Connect the Ethernet cable to the Ethernet port on the back of the product.
Add the HP Photosmart to a network 13
Finish
sett
ing u
p
t
h
e HP Ph
oto
sma
rt