Hayes Microcomputer Products PC Card - Manual (Page 26)

DIVA T/A PC Card Reference Guide 26
General AT Commands—Continued
Command Description
ATSn? Reports the Value of S-Register n: This
command reports the last value stored into S-
Register n. If n is omitted, the value of the
last S-Register accessed is reported.
AT@MENU Activate VT100 Configuration Tool: The
AT@MENU command activates the DIVA
T/A VT100 Configuration tool for
configuring basic ISDN parameters.
AT=n Last Accessed S-Register to Value n: Use
this command to set the last accessed S-
Register to the new value n.
AT>VD View Connection and Link Status
Information: This command displays link
and connection status for troubleshooting
problems. Your Eicon Technology Customer
Services representative may ask you to
display this information.
AT>VDL View Link States: Displays the link states.
AT>VDC View Connection Status: Displays the
connection status.
AT>VT View Stored Telephone Numbers: You can
display a list of all stored telephone numbers
currently saved on your DIVA T/A.
AT>VCC View Call and COM Port Parameters:
Displays the Call and COM Port dynamic
parameters.
AT>VCD View Dynamic Parameters: Displays all
dynamic parameters (Call, COM, V.120, PPP,
MLPPP).