Hayes Microcomputer Products PC Card - Manual (Page 38)

DIVA T/A PC Card Reference Guide 38
COM Port Configuration Commands—Continued
Command Description
ATXn Extended Result Codes: This command
selects which subset of the result messages will
be used by the DIVA T/A to inform the DTE of
the results from commands.
n=0
Provide basic result codes: sends only OK,
CONNECT, RING, NO CARRIER, ERROR,
and NO ANSWER.
n=1
Provide basic result codes and appropriate
connection speed (e.g., CONNECT 2400,
CONNECT 19200).
n=2
Provide basic result codes, connection speed,
and DIALTONE detection (default).
n=3
Provide basic result codes, connection speed,
and BUSY signal detection.
n=4
Sends all messages.
n=5
Terminal screen displays the remote number
along with the RING message. If the remote
number is not known the message UNKNOWN
is displayed.
AT\Vn Connect Message Control: This command
controls the format of connection messages
n=0
Upon connection, the DIVA T/A reports the
DTE speed only; for example, CONNECT
19200 (default).
n=1
Upon connection, the DIVA T/A reports the
DCE speed, the protocol, and the DTE speed
(same as ATW2).