Hayes Microcomputer Products PC Card - Manual (Page 53)

DIVA T/A PC Card Reference Guide 53
Mini-monitor Commands
This section describes the Mini-monitor commands.
Note: These commands are not to be prefixed by AT. Typing AT will
exit the mini-monitor and revert back to the normal software mode.
Your Eicon Technology Customer Services representative may ask
you to use these commands.
Command Description
$Load Loading new firmware
Note: This command needs a terminal emulation
program which supports XMODEM.
$Dump
Dumping memory using XMODEM
Note: This command needs a terminal emulation
program which supports XMODEM.
$Msg Display cause for entering the monitor
$>F Restores all profiles to the original factory settings.
Reverts the powerup profile to number 0. This
command has the same effect as AT>F.
Warning: All previous user-defined settings are lost.